Home icon Industry icon How Long Do Rear Drum Brake Shoes Last

How Long Do Rear Drum Brake Shoes Last

date 2022-06-14

How many kilometers can the drum brake shoes use?

The service time of drum brake shoe is 50000-80000 km. The brake pad is a vulnerable part, and the replacement cycle of the brake pad is determined according to the driving habits of the owner; If the thickness of the brake pad of the vehicle is worn to 1\/3 of the original thickness, it needs to be replaced. If the brake pad is not smoothed in time, the vehicle braking will be out of control and the driving safety will be affected.

How Long Do Rear Drum Brake Shoes Last

How to replace the brake shoes

Before formally replacing the brake pads, you need to select the right Semi Truck Brake Shoes,Trailer Brake Shoes Replacement,Trailer Brake Shoes replacement or other types of brake shoes replacement that match your vehicle.

1. Open the cover of the brake fluid reservoir in the engine compartment to see the height of the brake fluid page. If the brake fluid page is above the maximum limit, the brake fluid should be sucked out to prevent the brake fluid from overflowing during the replacement process;

2. Prepare the brake shoe to be replaced and remove the wheel on which the brake is located. Avoid rim scratching during disassembly;

3. Remove the bolts of the brake caliper with a wrench and a socket, and then remove the brake skin (if there is a brake sensing line, remove the brake sensing line first). Observe whether the brake shoe is excessively worn or cracked. If yes, replace it in the next step;

4. Since there will be a lot of sand or soil in the brake caliper, it is necessary to clean it with a rag, and then apply silencing paste to prevent abnormal noise during braking;

5. Use the piston pressure pump to press the piston to the position where it cannot be pressed, and then install the brake shoe on the brake caliper. After the new brake shoe is installed in place (it should also be installed if there is a brake induction line), tighten the guide bolt and complete the installation;

6. After installation, cover the reservoir, step on the brake pedal and reset the brake. Then observe the brake fluid height within the appropriate height range;

7. Test run after replacement to check whether the braking effect is reflected.


If you need replace your brake shoe,or you need to wholesale drum brake shoe,you can visit long-way,a brake shoe supplier and manufacturer.



Related news

More Products

Email: luping@hzroadage.com

Add: Xishan Industrial Area, Renhe, Yuhang District, Hangzhou,China, 310006

Hangzhou Longway Machinery Co., Ltd Support By Hangzhou Great Master

Hotline:: +86-571-86575535

  1. wdh-site
  2. wdh-site
  3. wdh-site


Thank You!

Your information has been sent to us, we will reply you shortly


No success, please try again!

Try Again