wdh-site
Home Home PRODUCT product

Brake shoe & Repair Kit-European Type

search
  1. Brake Chamber-America Type >
  2. Brake Chamber-European Type >
  3. Brake Shoe & Repair Kit-America Type >
  4. Brake shoe & Repair Kit-European Type >
  5. S-Camshaft & Repair Kit-America Type >
  6. S-camshaft & Repair Kit-European Type >
  7. Brake Drum >
  8. Spare Parts >
  9. Slack Adjuster >

China High Performance Semi Truck Drum Brake Shoes Replacement Company - Longway Machinery

Longway Machinery is a company specializing in the production of High Performance Drum Brake Shoes,Semi Truck Brake Shoe Replacement And Volvo Truck Brake Shoes.Our Brake Shoes are sold all over the world. Friends from all walks of life are welcome to visit Longway Machinery for technical exchanges and business negotiations. Longway Machinery sincerely hopes to work with you to create a better future.

Brake Shoe of European Type

The European brake shoe is a type of brake shoes(Like High Performance Drum Brake Shoes,Semi Truck Brake Shoe Replacement,Volvo Truck Brake Shoes) that was formerly used on European cars. It is different from the American brake shoe in several ways, including the way the shoes are attached to the calipers. The European brake shoe is also designed to be replaced less often than the American brake shoe.

 

Brake shoes and repair kits are a necessity on European roads, where the stopping distance from a stop sign can be much greater than in the USA. Brake shoe wear is common on European roads due to the high stopping distance, combined with the use of front-wheel drive vehicles.

 

Brake Shoe, SAF180, SAF180 brake shoe

 

High Performance Drum Brake Shoes

High Performance Drum Brake Shoes refers to an accessory that is pushed out by the action of the brake cam or push rod to suppress the brake drum and play a braking role.

Most cars use the front disc and rear drum brake structure. Under normal circumstances, the front brake shoes wear relatively quickly, and the rear brake shoes use relatively long time. The following points should be paid attention to in daily inspection and maintenance. aspect:

 

1. Under normal driving conditions, check the brake shoes every 5000 kilometers, not only check the remaining thickness, but also check the wear status of the shoes, whether the degree of wear on both sides is the same, whether the return is free, etc., and it is found to be abnormal The situation must be dealt with immediately.

2. The brake shoe is generally composed of two parts, an iron lining plate and a friction material. You must not wait for the friction material to wear out before replacing the shoe. For example, in the front brake shoe of a Jetta car, the thickness of the new piece is 14 mm, and the replacement limit thickness is 7 mm, including the thickness of the iron liner of more than 3 mm and the thickness of the friction material of nearly 4 mm. Some vehicles have a brake shoe alarm function. Once the wear limit is reached, the meter will give an alarm to remind you to replace the shoe. The shoe that has reached the limit of use must be replaced. Even if it can be used for a period of time, it will reduce the braking effect and affect the safety of driving.

3. When replacing, replace the brake pads provided by the original spare parts. Only in this way can the braking effect between the brake pads and the brake disc be the best and the wear is minimized.

4. Special tools must be used to push back the brake cylinder when replacing the shoe. Do not use other crowbars to press back hard, which will easily cause the brake caliper guide screw to bend and cause the brake pad to jam.

5. After replacing the shoe, be sure to step on the brakes to eliminate the gap between the shoe and the brake disc, causing the first foot to fail to brake, which is prone to accidents.

6. After the brake shoe is replaced, it needs to run in for 200 kilometers to achieve the best braking effect. The newly replaced shoe must be driven carefully.

 

 

Semi Truck Brake Shoe Replacement

The Semi Truck Brake Shoe can be replaced once every 10000 km or so:

1. Large trucks usually have hub brakes. Just remove the hub. For the drive axle, first remove the axle shaft, and then loosen the locknut with the tool commonly known as the big bowl (the small bowl is used for the front wheel, which is in the vehicle tool. You can see which one is as big as the bowl);

2. Afraid of trouble, the tires don't need to be removed. The wheel hub and the wheel are directly removed. We used to find a wooden board, apply some grease on it, and pad it under the tire. After the wheel hub is locked and loosened, it can be removed as soon as it is pulled and slid (this method requires more people, otherwise it's not easy to add two tires and wheels, and one person can't move it;

3. When replacing the brake shoe, prepare some grease and oil the hub bearing.

 

How To Replace Semi Truck Brake Shoe

1. First lift the car with a jack and remove the wheels. After removing the wheels, it will be found that there are two smaller threaded holes on the brake drum in addition to the tire bolts. These two threaded holes are designed to facilitate the disassembly of the brake drum.

2. Find two 6mm hexagon bolts and screw them into the threaded holes respectively. The main purpose is to push out the brake drum rusted on the flange through the bolts.

3. After loosening the brake drum, fix the shoe hole pin with pliers, then rotate the outer circular lock plate or press down the lock plate, disassemble the nearby spring, and then remove the hand brake cable on the control lever to remove the Semi Truck Brake Shoe

4. Remove the control lever from the old brake shoe to the new Semi Truck Brake Shoe, and reverse the installation to complete the replacement of the Semi Truck Brake Shoe.

Semi Truck Brake Shoe is an accessory that is pushed outward by the action of the brake cam or push rod to suppress the brake drum. It is installed on the brake drum and is one of the key safety parts in the automobile brake system.

 

Primary And Secondary Brake Shoe

A simple drum brake system uses Primary (leading) and Secondary (trailing) brake shoes operated by a single slave cylinder. Usually only on the rear wheels of cars, or now the front wheels of tandem trailers. The front brake shoes tend to wedge and become a self-servo brake without power assist. Trailing basically only becomes a forefoot when reversing, with this self-servo effect. The same applies to trailer electric brakes.

If you want to know more about The Difference Between Primary And Secondary Brake Shoes , you can learn from our blog.

 

Automobile Braking System

The automobile braking system mainly consists of the following parts:

(1) Control system pedals, handbrakes, etc.;

(2) Hydraulic system hydraulic oil, brake master cylinder, hydraulic oil pipe, brake sub-pump;

(3) Vacuum booster pump for booster system;

(4) Electronic control system ABS pump, ABS sensor, ABS computer;

(5) Execute system brake calipers, brake pads, brake shoes,and brake discs.

 

The braking effect of the braking system is ultimately determined by the brake shoes, so the quality of the brake shoes is crucial to the braking effect. There are two common types of brake shoes: one is for disc type The brake pads of the brake, and the second is the brake shoes for drum brakes.

 

 

Brake Shoe, 4515Q, 4515Q Brake shoe

The benifits of  Brake shoe & Repair Kit-European Type

The brake shoe and repair kit is perfect for European cars

The kit includes all the necessary parts to repair your brake shoes

It's easy to use and makes the job much easier

You'll have new brakes in no time

This is a great kit for anyone who does their own repairs

 

Where to buy brake shoe?

Longway Machinery is a leading brake chamber manufacturer & factory that focuses on automatic slack adjuster OEM. We solemnly promise to provide your products with excellent quality, reasonable prices and the highest cost performance.

Welcome to choose Longway Machinery - a leading brake chamber manufacturer & factory that focuses on automatic slack adjuster OEM.

 

China Brake Shoe manufacturers, suppliers, factory - wholesale Brake Chamber

Longway Machinery is a company specializing in the production of Brake Shoe. Our High Performance Drum Brake Shoes,Semi Truck Brake Shoe Replacement,Volvo Truck Brake Shoes products are sold all over the world. Friends from all walks of life are welcome to visit Longway Machinery for technical exchanges and business negotiations. Longway Machinery sincerely hopes to work with you to create a better future.

 

Email: luping@hzroadage.com

Add: Xishan Industrial Area, Renhe, Yuhang District, Hangzhou,China, 310006

Hangzhou Longway Machinery Co., Ltd Support By Hangzhou Great Master

Hotline:: +86-571-86575535

  1. wdh-site
  2. wdh-site
  3. wdh-site

Contact

wdh-site
Thank You!

Your information has been sent to us, we will reply you shortly

OK
wdh-site
Bad!

No success, please try again!

Try Again
SUPPORT BY HANGZHOU GREAT MASTER