wdh-site
Home icon Industry icon Semi Truck Brake Shoe Replacement - Ford F150 Shoes Info.

Semi Truck Brake Shoe Replacement - Ford F150 Shoes Info.

date 2022-06-22

Semi Truck plays an important role in transportation, and the safety of semi-trailer is very important. As an important part of the braking system, the performance of the Semi Truck Brake Shoe affects the braking of the Semi Truck or trailer.What are the specific functions of semi truck brake shoe replacement? How should it be replaced? What about the products of Ford F150 shoes? Through this article, I believe you can understand the answers to these questions 

Semi Truck Brake Shoe Replacement

Function of Brake Shoes

1. It is necessary to pay more attention to the use of brake shoes and brake discs at ordinary times. If there is a problem, it should be replaced in time to avoid the safety impact caused by brake failure;

2. brake shoes are also called brake skins. In the automobile braking system, the brake shoe is the most critical safety part, and the brake shoe plays a decisive role in all braking effects. Therefore, a good brake shoe is the protector of people and cars;

3. The brake shoe is generally composed of steel plate, adhesive insulation layer and friction block. The steel plate shall be coated to prevent rust. Smt-4 furnace temperature tracker is used to detect the temperature distribution during the coating process to ensure the quality. The thermal insulation layer is composed of materials that do not transfer heat for the purpose of thermal insulation;

4. The friction block is composed of friction materials and adhesives. When braking, it is squeezed on the brake disc or brake drum to generate friction, so as to achieve the purpose of vehicle deceleration and braking. Due to friction, the friction block will be worn gradually. Generally speaking, the brake shoe with lower cost will wear faster.

 

How To Change Semi Truck Brake Shoe Replacement

1. Release the brake button, remove the tire, remove the brake wheel cylinder, remove the rear brake wheel cylinder, remove the electronic brake motor (2 screws) with E40 flower tool, and then turn the electronic brake wheel cylinder shaft clockwise with E30 flower until it is tightened.

2. Then press the brake cylinder back with the special brake tool (or gently pry it open by the starter), install a new Semi Truck Brake Shoe Replacement, and install the electronic brake motor on the cylinder, which is installed normally.

 

3. After installation, press the electronic brake button several times. If necessary, it needs to be tested on the road, and then reset.

 

Ford F150 Shoes Info.

Ford F150 shoes is Semi metal asbestos free, Japanese and Korean process formula, soft braking, safe and reliable, wear-resistant and no noise. Applicable to Ford F150 and Lexus 400 brake.

Ford F150 Brake Shoes

Ford F150 brake shoes can be applied above 30000 km normally, and the manufacturer did not mark the fixed replacement cycle time. Ford F150 are originally equipped with Bosch well-known brands.

Example tutorial of Ford F150 replacement

Precautions for replacement: the rear tire of Ford F150 contains an electronic parking brake motor. Use the original on-board computer to take back the brake pedal cylinder. The brake shoe can be replaced only after the cylinder is retracted. The front tire can be disassembled and assembled immediately with special tools, not necessarily according to the on-board computer. The following is an example of the next round.

① Connect the vehicle with the on-board computer, and click the option "turn on the rear tire brake pedal cylinder" on the installation page. Then wait for five seconds, and the slave cylinder will get rid of successfully, indicating that the brake motor has already retracted.

(Note: remember to open the outer cover of the booster oil. As the slave cylinder retracts, the booster oil will inevitably flow back under the action of working pressure.)

② Loosen the two screws of the brake caliper. If the slave cylinder is not fully retracted, use a slotted screwdriver to manually break a little.

③ Then pull off the brake caliper housing to install a new brake shoe. The side with production text messages is outside, and the side without text messages is installed inside.

 

④ After the new Ford F150 brake shoe are installed, select "turn off the rear tire brake pedal cylinder" on the computer interface, and the brake motor will be calibrated a few seconds later.

 

Through the introduction of the above article, I believe you know something about the brake pads of semi trucks and the brake pads of Ford F150? How much are these brake pads? Will they be cheaper if they are wholesale? Welcome to contact us.

At the same time, you can also visit Longway air brake system components Machinery official YouTube website and LinkedIn website

Related news

More Products

Email: luping@hzroadage.com

Add: Xishan Industrial Area, Renhe, Yuhang District, Hangzhou,China, 310006

Hangzhou Longway Machinery Co., Ltd Support By Hangzhou Great Master

Hotline:: +86-571-86575535

  1. wdh-site
  2. wdh-site
  3. wdh-site

Contact

wdh-site
Thank You!

Your information has been sent to us, we will reply you shortly

OK
wdh-site
Bad!

No success, please try again!

Try Again
SUPPORT BY HANGZHOU GREAT MASTER